Spare parts · made from a sample

Broken part you can't buy anywhere? We make a new one

3D Lab in Haifa makes plastic spare parts that are discontinued or not worth waiting weeks for: fridge and oven door handles, stove knobs, dishwasher rack wheels and clips, fridge shelves and drawers, car interior clips, meat-grinder and mixer gears, covers, hinges and connectors. Send a photo of the part on WhatsApp — within hours we tell you whether it can be made, what it costs and when it is ready. One part is fine; there is no minimum order.

2–5 working daysUsual lead time. A small simple part is sometimes ready next day.
from 30 ILSSmall part up to 50 g. Medium 50–250 g — 100–300 ILS.
No minimumWe make single parts. No minimum order of hundreds of shekels.
No file neededThe broken part or a photo with dimensions is enough. We scan or model it.
Haifa — local pickup · shipping across Israel · updated: November 2026
What people bring us most

What people bring us most

These are the parts that break in the same place for everyone — and the importer no longer stocks them.

Fridge & freezer

  • Door handle (Samsung, Amcor, Electra, Haier, Beko, Liebherr)
  • Door shelf and shelf bracket
  • Fridge or freezer drawer — a broken corner or the whole drawer
  • Door hinge, hinge pin, hinge cover
  • Freezer door latch

Oven, stove & microwave

  • Oven door handle (Sauter, DeLonghi, Bosch, Electra)
  • Gas stove or oven knob — with an exact socket for the shaft
  • Microwave door latch
  • Foot, cover, plastic trim

Dishwasher

  • Rack wheel (Bosch, Siemens, Electra, DeLonghi)
  • Wheel axle and holder
  • Rack clip, glass holder
  • Handle and spray arm — case by case

Washing machine & dryer

  • Door handle
  • Drain hose clip
  • Knob and programme selector
  • Detergent drawer cover, lint filter

Small kitchen appliances

  • Meat-grinder and mixer gear (Kenwood, Bosch, Moulinex)
  • Blender / food-processor coupling
  • Coffee-machine handle, lid and latch
  • Foot, battery cover, adapter

Vacuum cleaner & air conditioner

  • Hose connector, latch, cover (Dyson, Miele and others)
  • Wall mount for a cordless vacuum
  • Louvre / flap for a wall AC unit
  • Remote holder, filter cover

Home: blinds, windows, furniture

  • Roller-blind wheel and handle
  • Window handle, screen clip
  • Cabinet hinge, foot and cap
  • Curtain bracket, shelf clip, table-leg plug
  • Toilet-seat hinge, drip-irrigation fittings and garden gear (ASA for the sun)

Car — interior plastics

  • Trim and upholstery clips
  • Mirror, armrest and cup-holder brackets
  • Interior handle, button cover
  • Parts for older cars the importer no longer brings

Kids, sport & leisure

  • Stroller: latch, connector, cover
  • Bike and scooter: mounts, guards, plugs
  • Toys and games: the missing piece
  • Camping gear, phone holders

Business, labs & machinery

  • Handles, covers, holders and adapters for equipment
  • Non-critical plastic parts for production machines and lab gear
  • Parts for non-implantable medical equipment: holders, covers, brackets
  • Small batches — dozens of units from one model
How it works

How it works

You send a photo

Photograph the part (even broken) from several angles and send it on WhatsApp with a rough size and the name of the appliance. Within hours we tell you if it suits.

01

We build the model

From the broken part, a similar intact one, a drawing or a 3D scan. If a piece is missing we reconstruct it from the logic of the part. If it keeps breaking in the same spot, we reinforce it.

02

You approve, we print

We send you the model for approval, choose the material for the load, heat and location (PETG, ABS/ASA, nylon, TPU) and print.

03

You collect and test

Pickup in Haifa or shipping across Israel. If the fit is off, we fix it. We keep the file, so a repeat order is faster.

04
Which material for which part

Which material for which part

Plastic usually breaks because the original material fatigued or cracked. We print in a material that suits the job — often stronger than the original. PLA is cheap but softens at about 60°C — a car parked in an Israeli summer gets there — so we do not use it for spare parts.

PETGThe default: strong, does not crack, takes up to ~75°C — dishwasher, washing machine, a car in the sun. Handles, shelves, brackets, clips.
ABS / ASAUp to ~95°C and harsh sun: near an oven, an AC unit, exterior car parts, a balcony. ASA does not yellow or crumble in Israeli sun.
Nylon (PA)Gears, hinges, anything that rotates and wears. Tough and flexible, does not split.
TPU flexibleSeals, plugs, feet, corner guards, anything that has to bend.
ResinFine detail and a smooth surface: small buttons, engraved covers, decorative parts.
PrecisionLayers down to 0.1 mm. A part that sits on a shaft or fits a socket is measured and fitted — not guessed.

What we won't make — honestly

What it costs

What it costs

The price has two parts: the print (by weight and time) and the modelling (by how complex the part is). The print can be estimated in advance; the modelling is quoted after we see a photo — before you commit to anything.

Small part up to 50 g

Knob, clip, pin, battery cover, dishwasher wheel.

from 30 ILS

Medium part 50–250 g

Fridge or oven handle, bracket, connector, gear.

100–300 ILS

Large or complex

Fridge shelf, drawer, large cover, a batch of units.

by quote
Why make it instead of searching on

Why make it instead of searching on

Original from the importer

For an older model it usually does not exist. When it does, you wait for the shipment — and sometimes only the whole assembly is sold, for hundreds of shekels.

Ordering from abroad

3–6 weeks, and the fit is not guaranteed: the same model is sold in different versions in different markets.

3D Lab in Haifa

Days, not weeks. We measure your part, not a 'similar' one. The weak spot can be reinforced. The file is kept for the next order.

Why this happens — in numbers

Why this happens — in numbers

7.5%–29%of products that 229 repair communities in 18 countries failed to fix could have been repaired with a 3D-printed partTU Delft study, PLATE 2021 — 41,874 repair records
Reason #1for a failed repair at repair cafés: no spare part availableRepair Café International Foundation, 2020, cited in the study above
11,000 SKUsscreened by Whirlpool: 7% were cheaper to print than to stock — the first part was a push button3DPrint.com, 2018
FAQ

Frequently asked questions

A plastic part broke and I have no file — can you make one?

Yes, this is the most common case. The broken part (even in several pieces) or a similar intact one is enough. We measure it, build a 3D model, send it for approval and print. If a piece is missing we reconstruct it from the shape and function of the part.

What if the part keeps breaking in the same place?

That means the original design is weak there. At the modelling stage we thicken the wall, add a radius instead of a sharp corner or print in a stronger material. A well-printed part can outlast the original.

How long does it take?

2–5 working days from model approval. A small simple part is sometimes ready next day. For a part with a complex model we state the time upfront.

How much does a printed spare part cost?

The print: a small part up to 50 g from 30 ILS, medium 50–250 g 100–300 ILS. The modelling depends on the part's complexity and is quoted before we start. There is no minimum order.

Will it take heat? Can it go in the dishwasher?

PETG and ABS handle dishwasher, washing-machine and sun-baked car temperatures. Inside an oven, on a stovetop or near a flame — no: that needs metal or glass, and we will tell you so upfront.

Is it suitable for parts that touch food?

For lids, handles, holders and drawers — yes. For parts in direct, prolonged contact with food (a blade or a container, for example) we do not recommend desktop printing, and we say so honestly.

Do you make car parts?

Interior plastics — clips, brackets, handles, covers, holders: yes, including for older cars the importer no longer brings. Safety, engine, brake and chassis parts — no.

And for medical or lab equipment?

Non-implantable, non-sterile parts: holders, covers, brackets, adapters, handles — yes, including small batches. Implants and sterile parts need certified manufacturing, and we do not pretend otherwise.

Do I need to bring the part in?

Usually a good photo with dimensions (a ruler or calliper next to the part) is enough. Complex parts are better brought to Haifa or shipped — we scan and return them.

Can I get the file too?

Yes. The file is yours — you can print it again anywhere. We keep it too, so a repeat order of the same part is just a print.

Which areas do you serve?

The workshop is in Haifa; pickup from Haifa and the Krayot. Shipping across Israel — Acre, Nahariya, Karmiel, Tiberias, Afula, Tel Aviv and anywhere else. The photo can be sent from anywhere.

Send a photo of the part — we'll tell you if it can be made

Send a photo of the part — we'll tell you if it can be made

Free check and quote, no commitment. We reply within a few hours.

You may also need
WhatsApp